Best Computer Processor For Photo Editing

By | 15/11/2022

If you're willing to try it, building your own PC allows you to get a better quality computer for less money. Here are the parts I'd choose for budgets from under $500 to $2,500.

If you’re willing to try it, building your ain PC allows you lot to become a ameliorate quality computer for less money. Here are the parts I’d choose for budgets from under $500 to $two,500.

Why Not Build Your Own Editing Dream Machine?

Buying a PC for photo or video editing is expensive, especially if y’all purchase a pre-congenital automobile.

why not build a PC how you want it?
If you’ve got a upkeep of nether $500 or even over $2,000, this commodity volition help you find compatible parts. From at that place, putting information technology together is unproblematic.

How much should you spend? That depends on how much y’all apply your computer for rendering and other tasks and how intensive those tasks are. Overall, if y’all tin relieve a significant amount of time by raising your budget, you’re better off doing so.

In this article, I’ll cover the parts I recommend based on your budget.

For Photograph and Video Editing, the Processor Is Male monarch

The concluding place you desire to short yourself on your photo editing build is the processor.

Here’s a table of where I’d rank the best processors for the money in late 2022. Below, you’ll besides exist able to find a tabular array with vi full builds from $500 to $2500.

Workstation CPUs for 2022

PC Budget Recommended Processor


AMD Threadripper Pro 5995WX


AMD Threadripper 5975WX or Intel Core i9-10980XE


AMD R9 5950X or i9-12900K


AMD R9 5900X or i7-12700k


Ryzen 5 5600X


Intel Cadre I5-12400F (Requires a dedicated GPU)


Ryzen five 5600G


For AMD Builders

Fantastic Adobe Premiere Benchmarks, 7Zip, and Adobe Photoshop Benchmarks for AMD give it a strong case vs Intel for edifice your photo editing PC. Adding gaming into the mix gives a slight, admitting inappreciably noticeable, advantage to Intel.

When AMD launched Zen iii, Ryzen’south 5000 series bested Intel in pretty much every scenario. Intel’s 11th gen countered it adequately well albeit with a adequately ability-hungry platform.

Ryzen 5 5600X
is a nifty pick with its 6 cores and 12 threads might be the perfect editing and gaming crossover choice. And, if I was going to build a PC in the $1,000 range in 2022, I’d certainly go with information technology.

Thoughts on AMD

Correct now information technology’s hard to not similar AMD. On the low end, the 4 core and 8 thread Ryzen five 5600G gives yous an integrated graphics choice that would work fine for some photo editing. Upper middle range you’ve got the Ryzen 9 5900X and on the high-cease you’ve got the incredible Threadripper Pro 5975WX with a massive 32 cores and 64 threads.

Mayhap the one place where Intel is edging upwardly on the high-stop for workstations is the i9-12900k which outperforms the Ryzen 9 5950X.

My All Around AMD Enthusiast Option

Want a reasonably priced part that gives you 12 cadre / 24 thread power? The Ryzen 9 5900X is where you should be looking. This fantastic all-around CPU allows you lot to back up a plethora of software at a high level and even game on the side.

For nigh builds in the $i,500 to $2,000 range, it should be perfect.

For Intel Builders

If you lot adopt Intel, I think you’ve got a lot to look forrad to in 2023. Right now the i9-10980XE is a not bad option for high-finish users, the i9-12900K is solid for upper heart range, the i7-12700k beats the Ryzen 7 5800X. And while it’s important to keep in mind that the Ryzen 7 5800X is $50 cheaper, the i7-12700k actually beats the Ryzen 9 5900X in some threaded applications.

If You’re on a Budget

One actually prissy pick for Intel is their F series processors for budgets. Above I listed the i5-12400F which is a fantastic CPU for around $175. And even the $100
Intel i3-12100F
even gives you lot iv cores and 8 threads.

Compared to where we were just a few years ago, I remember you can should be encouraged as a PC builder headed into 2023.

PC Budget GPU


RTX 3090






RX 6600XT


RX 6600

Nether $500

integrated graphics

A Solid Graphics Card Choice for Most

The RX 6600XT is a very affordable choice and gives you a lot of bang for your buck at its price range.

The RX 6600XT is a very affordable selection and gives yous a lot of bang for your buck at its price range.

I adopt gaming-style graphics cards for photograph editing. Virtually of the photo editing and rendering software that a typical hobbyist would use performs very well with the affordable
XFX Speedster SWFTR RX 6600.

It’s a very affordable card that makes a big difference. From there, I’d upgrade to the RX 6600XT and 3060Ti.

If you need the all-time of the best yous may determine to pay the premium to get something like the RTX 3090Ti. However, for most, this will be overkill.

Based on your upkeep, I’ve put together some premade builds below that balance your budget with your processor graphics card and everything else.

The Table Above Isn’t for Everyone

Non everyone needs the highest-stop graphics card. In fact, some of you may determine that allocating more of your budget to storage, or a better CPU is the ameliorate option. This will depend upon the software that you use regularly, so please go on that in listen.

For Budgets From $150 to $300

As you can see in the builds table, I recommend y’all get for something like the RX 6600 for around $200 and at effectually $300 the 6600XT. And depending on what type of software y’all’re using, even these options may or may not exist worth it.

So, y’all’ll want to await upward benchmarks that correspond the type of software you personally apply. Photoshop functioning, for example, is still heavily reliant on unmarried-core CPU functioning.

While I’m hoping that going forwards Photoshop will limit its reliance on a single core, it’s what nosotros accept correct now.

Just looking for a build? Hither are 5 options from $500 to $two,500 that I feel give you great overall value for the money y’all spend.

*Your Storage options will vary greatly. So, I’g just setting a placeholder here that’s a decent value.

Budget (Whorl for More than) $500 $750 $1,000 $ane,500 $2,000 $two,500+


Ryzen 5 5600G

Intel I5-12400F

Ryzen 5 5600X

Ryzen nine 5900X

Ryzen 9 5950X




ASRock B660M Pro RS


ASRock X570S PG Riptide

ASRock X570S PG Riptide

MSI Pro Z690-A

Graphics Card


RX 6600

RX 6600XT



RTX 3090


Samsung 980 1TB M.2 Solid Country Drive

Samsung 980 1TB M.2 Solid State Bulldoze

Samsung 980 1TB M.2 Solid State Drive

Samsung 980 1TB M.2 Solid State Drive

Samsung 980 1TB M.2 Solid State Bulldoze

Samsung 970 Evo Plus 2 TB


Corsair Vengeance LPX 2x8GB

Corsair Vengeance LPX 2x8GB

Corsair Vengeance LPX 2x8GB

Silicon Power Gaming 32GB 16×2

Silicon Ability Gaming 32GB 16×2

Patriot 2x16GB Signature Line DDR5-4800

Ability Supply

Cooler Principal MasterWatt 550 Bronze


Antec NeoEco Aureate Zen 700W

Antec NeoEco Gold Zen 700W

Corsair SFS750 Platinum

Enermax Revolution D.F. 850 W 80+ Gold


Fractal Design Focus

Fractal Design Focus

Corsair 4000D

Phanteks Eclipse P500A D-RGB

Phanteks Eclipse P500A D-RGB

Fractal Design Torrent RGB

CPU Cooler



Noctua NH-12S

Be Quiet Dark Stone Pro 4

Be Quiet Dark Rock Pro 4

Chill Liquid Freezer II 280


Finding the Right Motherboard

If yous’ve never built a computer before, it’south important to realize that your motherboard options depend on the processor you choose.

For example, if you get with the i7-8700k, which is an LGA 1151 socket processor, then you lot’ll need a compatible socket 1151 300 serial rather than a 200 series motherboard.

Information technology’due south like shooting fish in a barrel enough to look in the product description for the CPU to find out what socket motherboard yous need. This bones breakdown may help too:

Motherboard and Processor Compatibility

Motherboard Types Compatible Processors Notes

Socket 1151 (300 Series)

Coffee Lake eighth/9th GEN

Requires DDR4. Not compatible with 200 series 1151 motherboards.

Socket 1151

Skylake (sixth GEN), Kaby Lake (7th GEN), 8th Gen, 9th Gen

Most motherboards require DDR4. Not compatible with 300 series 1151 motherboards.

Socket AM4

AMD Ryzen

When used with Ryzen 2 some AM4 300 series motherboards may need a BIOS update – 400 series may be the safer bet. For the new 3000 Ryzen series the X570/470 motherboards are what I’d recommend.

Socket 2011

Sandy Bridge, Ivy Bridge

Older processors need a DDR3-uniform motherboard

Socket 2011-v3 X99

Broadwell and Haswell Enthusiast Merely

Requires DDR4

Socket 1150

Haswell (4th generation)

Socket 1155

Sandy Span, Ivy Bridge (second, third generations)

Socket AM3+

AMD FX series processors

Compatible with older AMD CPUs being sold

Socket FM1 or Socket FM2

AMD Llano, Trinity, Richland APUs

Whether FM1 or FM2 depends on the generation

Choosing a Motherboard for Various Budgets

If you’re merely looking for my recommendation for your upkeep, I’ve made a listing of all the parts (based on the budget) above.

For the motherboard, I typically look for something that’s reliable and that has all the features I need.

If this is more than you care to await at, don’t be afraid to skip to my full PC parts list for each upkeep below. Motherboards listed are compatible with the chosen processors on that list.

Under $500 Build

In the $500 range, try and notice the to the lowest degree expensive, simply most reliable motherboard available.

$1,000 Build

For the $ane,000 build, we’re nevertheless trying to save as much as nosotros can on our motherboard then we tin can put performance to where information technology’s going to matter most, our processor. You lot’ll notice that the processor jumps up in every budget I’ve listed above.

While information technology’s easy enough to upgrade a graphics menu afterward on, when you lot need to replace your system will likely be adamant by your CPU. So, for these builds, we’re going with inexpensive options.

$1,500 and $ii,000 Budget Build

In the $1,500 range, we’re entering enthusiast territory, and going with a motherboard that allows us to become a decent overclock is certainly something nosotros want to take advantage of.

That means on the AMD side we’re looking at the X570 series of motherboards. On Intel’s side, the Z490 serial. These motherboards are the latest generation and have the all-time to offering to date.

That being said, don’t experience like you need to go with an expensive motherboard. A very good overclock can exist established on a mid-range motherboard. In addition, these likely accept plenty slots for all of the difficult drives you’ll be using.

Bank check the motherboard’s specifications if y’all demand more details.

How Much Ram Is Enough for Photo or Video Editing?

If you lot program on upgrading or overclocking your RAM in the time to come, y’all’ll want a motherboard now that tin can back up more than RAM and/or higher speeds.

For Photo Editing

Almost professionals don’t use more than than 32GB of RAM. If you’re making this figurer every bit a photo editing PC and edit 1 photo at a fourth dimension, then nigh likely you’d be fine with just 16GB.

For multiple photos at one time consider at to the lowest degree 16GB of ram.

For Video Editing

For apprentice video editors, I’d recommend 16GB; this tends to be enough to get the job done when editing Hard disk video.

For professionals, I’d recommend going with 32GB to commencement with, and upgrading from at that place if you lot find that you’re using the total amount.

More than Tips on RAM

If you buy your RAM in sets of 16GB, DDR4 isn’t that much more expensive than DDR3, and it lets you future-proof your PC.

In my recent post on the best DDR4 memory or RAM, I talk nearly how cheaper memory seems to make more sense right now due to the lack of performance from more expensive kits. I recommend yous go with something fast but non overly expensive. The Corsair Vengeance LPX 3000MHz serial is my recommendation.

Hard Drive and Storage Options: Solid State Drive or Disk Drive?

Solid-state drives (SSD) work well for storing your Bone and applications, or every bit “scratch disks” designated for temporary use by Photoshop or other programs. That being said, you’ll accept to decide whether solid-state is worth it for you lot, and whether it’south amend than using a RAID configuration (a series of disk drives).

If yous’re even so not sure what you should do, and then see this Adobe document on optimizing Photoshop performance, which suggests that RAID 0 arrays make great scratch disks.

Personally, I’ve gotten used to the speed advantages that come up with having a solid-land drive for my Os and applications, and I don’t programme on going back. For this build, I’ll recommend a modestly priced SSD forth with a disk drive. I utilise an SSD to shop my Os and applications, and a disk drive to store videos and photos.

My Picks for SSD and HDD

  • Samsung 970 Evo:
    Capacity, speed, and reliability. That’due south why I typically go with the
    Samsung 970 Evo. And you lot’ll definitely want at least enough capacity to fit your OS and favorite programs on here.
  • Budget Pick ADATA Premier SP550:
    The Kingston A400 SSD is the perfect mix of speed and value. I’d recommend at least the 240GB version so you have enough for your operating arrangement and most important programs. The increase in speed of a solid-country drive makes information technology well worth having for any car yous own.
  • HGST Deskstar:
    A disk drive should be fast and ultra-reliable: that is, with 7200RPM and a 64 MB cache. I really like the 2TB Seagate Barracuda options available in 2020. They give you 2TB of infinite for around $lx.

Depending on your upkeep you may desire to buy several of these. For the $2,000 build, I’m recommending three.


A Repose Instance and Cooler

  • NZXT H510:
    For a reasonably priced case that has great cablevision management and is h2o cooling gear up, I like the NZXT H510. It also has great-looking tempered glass which allows you to encounter your hardware.
  • Fractal Blueprint R5—The Perfect Placidity Instance:
    Personally, I identify an emphasis on cases that go on my system absurd and quiet. The Fractal Design R5, shown higher up, not but does all of that, but at a price point that’due south affordable. This case looks cracking, supports as many fans as you lot’d want, includes easy-to-install solid-country drive mounts, and has USB 3.0 in the front. It looks professional and has noise-dampening cloth congenital into the case.
  • Corsair 100R Silent ATX Mid Tower:
    For a less expensive choice with a smaller contour, you should also consider Corsair’s 100R. It’s a reasonably cheap option that won’t distract from your workspace. This makes it platonic for an office environment where a powerful, but noisy, computer tin sometimes distract.

Do Y’all Need a CPU Cooler?

Intel’s “Yard” Series of processors don’t come with a stock CPU fan, and then y’all’ll definitely need one. However, if you lot use an selection like the i5-8400, you may want to apply something beyond just the stock fan to proceed your most important piece of hardware cool for the long run.

  • Hyper 212 EVO:
    The Hyper 212 Evo is inexpensive and perfect if you lot program on doing some light overclocking. For higher-end overclocking, consider the Corsair H100i serial or NZXT Kraken series of liquid CPU coolers. If you go with the Hyper 212 EVO it does have a fairly large contour and won’t fit the Corsair 100R Silent tower in a higher place. However, the Fractal Design R5 is plenty big.
  • Corsair Hydro H60:
    For a smaller contour liquid cooler, consider the Hydro H60. This would be the perfect libation to work with the Corsair 100R.

A Good Monitor for Photo Editing

If you desire to read up on this subject, you lot tin can read my postal service on the best photo editing monitors nether $500.

If you lot’d like to skip all that, and so my recommendation to go on this build under $2000 would be the Dell UltraSharp U2715H. It’s a 1440p 27″ monitor then it has plenty of screen real estate.

Well-nigh importantly, it comes factory calibrated out of the box at 99% sRGB with a deltaE <three. For the price, it gives the best color accuracy and consistency out of the box while giving you spectacular viewing angles and color with its QHD panel.

Do You Really Need a Graphics Card?

This depends on how often you’ll be using your PC for tasks that tin have advantage of it.

If you’re focusing more on CAD-based applications, then you may be better off going with a workstation-type graphics bill of fare, a Quadro or Firepro, than a gaming graphics card. This may also be your choice if you use any program which tin take advantage of CUDA or OpenCL as it will reduce your rendering times.

But, in general, the less expensive gaming-oriented Radeon and GeForce graphics cards perform admirably and beat out the Quadro and Firepro for nearly benchmarks.

Overall, y’all’ll desire to expect at benchmarks for the programs that you use and make a choice based on how a graphics carte performs for that specific software.

A Quality T1 Power Supply

If you’re building a skillful graphics or photo editing machine, I highly recommend a adept ability supply. A quality power supply is not only more power-efficient, it’s too safer in the long run.

Considering the costs of your components, this is actually a no-brainer. Besides, in a place where free energy costs are high, you’ll chop-chop make back the divergence.

Right now I’d recommend you go with the EVGA SuperNova 550W or 650W models. These give you lot a great quality selection that’southward affordable as well.

Future-Proofing and Upgrading Your Editing PC

As I handle rendering, photo editing, and video editing every day, I upgrade the hardware on my PC regularly. The extra performance saves me a lot of time, money, and headaches in the long run.

While there certainly isn’t annihilation yous can exercise to time to come-proof your PC entirely, upgrading your motherboard and CPU or graphics bill of fare may be something y’all’ll want to do on occasion.

However, for those that truly need the functioning that new technology regularly brings, you may opt for selling your previous PC and building a new one birthday. Even if I’ve upgraded my editing PC, I tend to do this every few years.

Putting Together Your PC

Putting all the parts together is uncomplicated as long as you’re sure they’re uniform. Once your parts arrive, you’ll see the motherboard and how most of the process is plug and play. It really is that elementary.

If you need help, I recommend you take hold of a friend or sentinel a few YouTube videos to embrace whatsoever questions y’all may have. You lot can also enquire me whatever questions you may accept below.

Last Thoughts

These builds are what I’d recommend based on your budget. That being said your needs might differ from the typical photo or video editors.

If y’all take any questions, I’grand more than happy to help you in the annotate section beneath as soon as I can.

This article is authentic and truthful to the all-time of the author’due south knowledge. Content is for informational or entertainment purposes simply and does not substitute for personal counsel or professional advice in business, financial, legal, or technical matters.

© 2013 Brandon Hart

Need Assist for Your Build? Discuss!

Lamp borok
on June 09, 2020:

Sir. I want to congenital assemble PC for video editing and recording purpose under 50k please suggest me what… I should buy

on December 09, 2019:

Stick with a ryzen cpu much ameliorate at work station loads such as photograph editing and video editing and yous can save meaning toll on a gpu in the mid range by going with an Radeon 5700 or 5700xt both Wich match or exceed the performance of even the new gtx 2070 super and crush the gtx 1070. Hell you tin build a killer setup with a RX 5700xt and a ryzen 7 3700x with everything else y’all need making a killer work station and gaming rig in between the $grand-$1500 range mine was $1100 and easily competes or even beats 1500+ systems in rendering and talking functioning!

on November 08, 2019:

Excellent advice for a commencement time building. What would you recommend as a choice if including a card reader (SD, Flash, etc) as a second optical bay.

on October 30, 2019:


on October 10, 2019:

thank information technology actually helpful data for me to get chose for video editing machine.

Jean Marc Lavoie
from Chicago, Illinois on September 27, 2019:

I am upgrading an existing computer at work so I can too practice some photo editing on breaks and when i stay tardily. It has a 4-core i5, I am upgrading the arrangement ram to 32gb DD4 3200mhz, does the amount of video carte ram thing? How much do you advise (I think my choices only get up to 4gb)? I will be using it primarily with Lightroom and Photoshop and sometimes I may be running other work related apps at the same time. Cheers!

on September 12, 2019:

thanks for this guide! I have a small youtube aqueduct and needing to upgrade my antique prebuilt Gateway PC to something that is electric current and I can abound into over the next few years. Not being a computer guru and the consummate over saturation of gaming pc info on the net makes figuring out all this extremely confusing. Then again, thanks for the info! Greg

on June 26, 2019:

Hello, Carl.

Great thorough article.

Quick question: I recently built a pc for editing photos in photoshop.

Getting a scratchdisk notification saying it’due south full.

I’m currently have 16Gigs of RAM

Working with very very large files (sometimes)…up to 50Gigs (not Megs) in size. Yeah, the photo will exist just under 20 anxiety in width.

Would I only need to add more RAM to take care of the trouble?


on February 23, 2019:

I accept a 4k tv i want to use for editing photos mainly not much video. Can i use the 500 dollar setup for a calculator? I have a pentax one thousand-1 camera. Cheers!

on October 22, 2018:

Hey there, just wondering for someone new ti building a pc

What would you lot recommend for video editing, i do have a 780ti and i was wondering what build i should go with to suit it.

What would yous recommend for a budget under $1000?

Jagmeet Singh
on June 22, 2018:


I accept a PC with the post-obit specifications:

Motherboard: M5A99FX PRO R2.0

CPU: AMD FX-8350


GPU: 1 GB NVIDIA GeForce 9400GT

Cabinet: Corsair SPEC-03

CPU libation: Cooler Master Hyper EVO 212

But lately I have been having trouble with memory limitations and also i should mention that my monitor is very old and i am planning to supercede it very presently. So I was wondering if i should spend money on a GPU, RAM and a monitor or should I merely get a laptop?


Demand assistance
on March 26, 2018:

Tin you advise which gourmet to utilise with the i5 8400 ? As I volition exist performing tasks which need a gpu like heavy cinematic transitions etc

on March 22, 2018:


I don’t take the technical ability to build my own system.

With a upkeep of around $1500 what is the best off the shelf PC you could propose mainly for video editing?

4k preferably but reading your post 1080 is probably more likely.

Many thanks,

Brandon Hart (author)
from The Game on February 19, 2018:

Yep, I run around updating quite a few manufactures on every release. I should be getting effectually to it shortly. Although, if you’re going with the 2400, I’d probably tell you yous might as well get with the R5 1600.

Nesper Stumbleduck
from U.s.a. on February 19, 2018:

You should definitely do an updated article with the new AMD APUs. They’re adequately inexpensive and from what I have seen they might be slightly more than productive than their equivalents.

Brandon Hart (author)
from The Game on Feb 14, 2018:

It’due south not going to ho-hum your desktop downwards to selection the wrong GPU… The CPU may bottleneck the GPU in some games. For the i5-7400 I’d probably become something no higher than the GTX 1060 or RX 580.

Min Min
on February 12, 2018:

What is best gpu that match with corei5 7400 7th gen, i don’t want to slow down my desktop if i put wrong gpu. then is at that place any recommendation.

Abhishek bage
on February 01, 2018:

Delight help me

on January 29, 2018:

Good to hear. I hope you are right… thanks for the fast respond.

Brandon Hart (author)
from The Game on January 28, 2018:

I haven’t read Everything on the subject; yet, I am familiar with it. From the mail Windows update benchmarks, I’ve seen the operation differential should basically be negligible for Intel. How will security piece of work going forwards? I’m non sure. For, AMD it doesn’t seem to be as large of an issue.

on January 28, 2018:

What are your thoughts on AMD versus Intel in light of the recent meltdown and spectre security issues? Thanks in advance. Corking article.

on January 28, 2018:

Brandon C. asked a question a few weeks ago almost a 9GB file not being able to fit onto a 32GB USB drive / SD card. This is likely due to the formatting of the drive. If its formatted as FAT32 which is quite common then the maximum file size it tin store is 4GB.

You’ll need to either change the format drive to be able to store files above 4GB, if you use windows then endeavour NTFS (or in a higher place) or Linux endeavor EXT4

Brandon Hart (author)
from The Game on January 26, 2018:

In that location are some hiked prices right now due to the cryptocurrency nail. Try and gild your GPU from NVIDIA direct or apply something else until prices stabilize.

on January 25, 2018:

Hello Brandon , your commodity is really very helpful.

I am on tight budget around $500. When I checked all the parts of $500 build on amazon, The total price for the parts comes to betwixt $750-$850.

Million Meyer
from at the embankment or in my studio. on January 24, 2018:

Splendid recommendations, Brandon! Being a bilingual geek (Mac & PC), I’ve been going back & along betwixt custom building and ownership the new iMac Pro. I’d love information technology if you lot wrote a recommendation for a comparable build! (If yous already did so, share the link!) Please & Thank you.

-One thousand thousand

on Jan 24, 2018:

I’ve just built a following PC:

Ryzen Threadripper 1950X

Asus x399 Zenith Extreme

64Gb RAM (Corsair Vengeance LPX 3000 cl15)

Intel Optane 900p 480Gb every bit a primary disk (system, lightroom catalog, PS scratch etc)

Samsung 960Pro 2Tb for hot files storage

Several HDDs left from my erstwhile build (two-8Tb each) – cold storage/backups

ATI Radeon Pro WX3100 (no need for a powerful video carte du jour for me, about gaming cards are insanely expensive due to shortage nowadays)

on January 23, 2018:

I want to build a video editing pc, but I don’t know what to do with the loftier video card prices. Mining is really making information technology hard for anyone wanting to build a calculator correct at present. What do yous advise?

Kong thao
on January 21, 2018:

I’g completely new at this. I have a radeon r9 290x laying effectually. Could i use that to substitute for the GTX 1050 ti? What are the pros and con?

Brandon Hart (writer)
from The Game on January eighteen, 2018:

I take several posts written on that subject area.

on January 18, 2018:

Hello Brandon…

You expect at all the components, except for probably the most important when doing Photograph editing: the monitor?

Do y’all have whatever preference or recommendations?

Brandon Hart (writer)
from The Game on Jan sixteen, 2018:


I’ve regularly updated this article over the terminal several years. It is current every bit of now.

on January 13, 2018:

Hey Brandon,

Squeamish, thorough, well organized commodity!.. I build hundreds of PCs in the early on to mid ’90s when I ran an OEM PC store but I oasis’t kept upward at all and have been buying off the shelf for the last ten years or and then.

I am looking at the college stop, ~2K range, for video transcoding, and just wondering how current your tabular array at the stop of the commodity is. The article was update January 3 ‘xviii, but the comments are months one-time.

If zip has changed, I’ll buy based on your recommendations.

Thanks! Kevin

Brandon Hart (author)
from The Game on December 12, 2017:

I’ve mentioned the builds I recommend past budget above. No matter what, if you’re getting this built for you, I’d get with the newer platforms (AMD Ryzen AM4+ or Intel Coffee Lake Z370).

The 8th generation Java Lake CPUs area vastly improved over the previous generation equally they typically include an additional 2 cores for the price. Ryzen, actually gave AMD something competitive and anything prior to it wouldn’t be worth its common salt right at present.

So, stick with the new and you should get something that volition last you quite a while. Every bit far as upgrading, I find I can brand it several years without worrying nigh that too much as long every bit I requite myself a decent plenty upkeep up front end. That being said information technology’s incommunicable to know exactly what will come out in the future that will dethrone the current tech. Will information technology be something yous tin can incorporate into this organization? I’m non exactly sure.

on December eleven, 2017:

Hey Brandon, I was in a Best Buy and subsequently hearing that I wanted to buy a video editing computer, the guy recommended edifice 1 for the best bang for the buck, and to get what I wanted, not more or less. I don’t desire to actually build it myself, but desire honest assist to specify the components past quality and cost (value). The trouble is, I don’t know what I demand and would similar to know who can help me put together exactly what I need. I’yard a novice at editing, merely have the bent to learn information technology. I’ve digitized over lxx videos, slides, and prints and want to cut them upward for a legacy purposes. I as well would similar to take this noesis to the professional level and detect where I demand to specialize commercially. How can I get a video editing build that is cost efficient right now, but however has the rendering speed and upgrade capabilities for future growth, etc.?

Brandon Hart (author)
from The Game on December 11, 2017:

How often are yous publishing these videos? If just once a week, you would probably be more than fine with the $1,000 build.

on December 09, 2017:

Hey Brandon. Cheers a ton for this commodity! I oasis’t built my ain PC since early 2000s (no longer required specific builts and off-the-shelf was decent plenty), but my new project requires me to edit YouTube videos. I shoot these videos in UHD and a typical video can get from anywhere betwixt fifteen to 45 minutes. I’m using Lightworks for editing (nonetheless learning) and the videos don’t require whatever particular special effects (just initial transitions for the intro part of the video). Since I really don’t have a lot of experience in video editing, which of the higher up builds would you suggest that gets the task done in a decent enough time?


Brandon C
on December 01, 2017:

Awesome content! Weird question for you. I had a 9GB MP4 file to copy to a 32GB USB 2.0 thumb drive (and fifty-fifty a micro SD card) and the Windows 7 OS said destination has insufficient space? Also, what is a skillful rule of thumb for 1080/60i Hard disk video to render minutes of video:minutes to render? Thanks

Brandon Hart (author)
from The Game on November 30, 2017:

Best I tin do is an e-mail and yous can contact me through the contact author pick to a higher place.

Robert Michaelson
on Nov 29, 2017:

Hi Brandon, Your article I just read was first-class! And then organized which organized my thoughts and now have it on paper…wahoo.

This will be my first build and subsequently many many you tube videos I accept a slightly more conviction but even so have some questions. To brand it more than of a claiming I live in Thailand and then beside the linguistic communication and community it is and so easy to not understand hem. Now this is not like the U.s.a. or Costco…No returns no affair what.

So can we connect via skype, Facebook or I tin fifty-fifty telephone call you lot depending your time zone?

I would be and then grateful


Brandon Hart (author)
from The Game on Nov 25, 2017:

No trouble! Cheers for the input.

Nooice Mate
on November 23, 2017:

I don’t e’er go out comments on articles that requite me info but when I practise it means the article was EXTREMELY helpful. Thank you Brandon for making my computer projection a whole lot easier.

Brandon Hart (author)
from The Game on Nov 22, 2017:

George, I’ve listed them in columns above for the $ane,000 or $1,500 budget. The large compatibility event is the CPU and motherboard where any Z370 motherboard is uniform with 8th generation Intel processors (i5-8400 or i7-8700) and any X370 motherboard compatible with AMD Ryzen processors similar the R5 1600 or R7 1700 in this case.

on November 22, 2017:

Im doing some research on video editing pc’s at the moment. i found your commodity, which is fantastic, simply i am nevertheless unexperienced with technical details. im looking at the 1000 budget.

My question is: are most of the figurer parts uniform with eachother?

I wouldn’t mind upgrading parts as i become on, only i dont desire to have to “build a whole new pc” but so i can update. Im mostly looking into upgrading from the m budget to the 1500 budget.

Pardon for the long windedness. If annihilation i’ll proceed to do my inquiry. but i thought i would ask the person who came up with the list in the first place. Give thanks you again for the article!

on November ten, 2017:

What GPU processing benefits practise you get if you apply two NVidia 1080 (or any) SLI cards? I understand it tin can increase the video size, but I am more interested in what GPU photo editing processing benefits it might add.

on November 03, 2017:

hey Brandon, I really liked your Guide. go along information technology up

Brandon Hart (author)
from The Game on November 02, 2017:

Yes, I only updated it yesterday 🙂

on November 02, 2017:

Ok Brandon, I lied; I have more than one question! The other question is about the parts list you lot testify higher up, where you testify a tabular array that lists, by budget, the Processor, Graphics Bill of fare, Motherboard, Storage, Retention, etc…

Is this list of parts still good? I am looking to practice the $2000 build, and I want to make certain earlier I start ordering parts. Thank y’all for your help!

Brandon Hart (author)
from The Game on November 01, 2017:

Technically you practise not have to buy Windows seven once more if you already accept it. If yous have the serial number yous should be able to actuate it for Windows vii. If you lot run into a problem, telephone call Microsoft and they’ll assist. On the other hand, if you want Windows 10 and never upgraded to information technology for free (that ended in July of last year), you may have to fork out some money in guild to get it. However, in that location are some means to still get the free upgrade – although I won’t mention them hither you tin can Google it to find out more than about that. I was able to do this successfully with one of my older machines earlier this year.

on November 01, 2017:

Hey there Brandon. Awesome commodity! Will aid me a lot with the build I am about to exercise. One question: what nigh the Operating System? I assume you take to purchase that separately? Currently running Windows 7, just feel I should go alee and upgrade to Windows 10. After my build, when I transfer data to the new machine, do I just transfer the Bone I have, or do I have to purchase Windows 10? Thanks for your assistance!


Brandon Hart (author)
from The Game on October 30, 2017:

Absolutely I need to update this commodity. I’d go with the newer gen if possible.

on October thirty, 2017:

What near the new intel generation?

I can get the 7700k or the 8700 for the same cost and not sure what to choose.

8700 more cores, the 7700k is faster

Will use the pc for 3d graphic design.

Thanks, what a nifty article!

on October 25, 2017:

Awesome, thank you man! Looking forward to the update: swell stuff in here.

Brandon Hart (author)
from The Game on October 25, 2017:

Not annihilation in terms of the overall CPU performance as you won’t be overclocking it anyway. Some older H110 chipsets demand an update before using with the Kaby-Lake CPUs so go along that in heed.

By the way, This article may need an update with 8th gen CPUs which I should get effectually to in the side by side calendar week or and then.

on October 25, 2017:

Hey Brandon, this is the first fourth dimension I’m building a computer and this has been a great resource! I am mostly looking at the $1,000 budget parts, but also trying to run across which parts I might exist able to switch for the cheaper versions y’all take nether the $500 upkeep.

Specifically, I am looking at all the parts from the $1,000 budget, but switching the motherboard to the Gigabyte GA-H110M-A. What are the implications of doing this if I am generally merely using the figurer for photo and video editing. I know it’s compatible based off the PC Part Picker website, but just wondering if the mother board will exist sufficient for what I am looking to do.

Thanks a ton!

Brandon Hart (author)
from The Game on October 04, 2017:

Not sure of exactly what you’re trying to build simply there are motherboards with TB3. I think if I remember Gigabyte has a few… the Gigabyte GA-Z270X-UD5 for i – there should be a lot of newer Z370 motherboards for Coffee Lake CPUs (release is the 5th for that)

on October 02, 2017:

Give thanks you. Whatever tips for a build that volition allow me to plug in my existing Thunderbolt 2 RAIDs? There is a TB 2 to TB three (USB C) adapter but I’1000 having trouble finding motherboards with TB3. Know of anything?

Mark V.
on August xviii, 2017:

My onetime GeForce 8500 GT is dying…probably pushing the better of 10-xi years. I am looking to supercede with a card that tin fairly handle medium video editing, using Adobe CS.

The result is, nosotros have an oldie-but-goodie HP Pavilion desktop (m9150f), with limited power and older CPU. Looking to upgrade to workstation next year, and give this ane to kids, just still have some projects to finish.

Intel Quad Core Q6600, Benicia MoBo, maxed 8 GB RAM, 350 watt PSU.

I was looking at GeForce GTX 750; is this the best replacement card for video editing with these components, with these power/upkeep constraints? Not actually using 4K, generally Hard disk drive.

Whatever advice would be helpful…Cheers.

on July 22, 2017:

Hello Brandon, I do loads of heavy photo editing using LR – I would like to uplift the PC below or if it’s a waste matter of time consider starting a new build. A modest upgrade now to see me OK while I look to save for components for a new one feels right. What would you lot recommend?

My thoughts are RAM upgrade to 16Mb and maybe new graphics carte with 4 or 8Gb VRAM or max I can?

From Task Manager, I come across that I could do with a i7 Quad cadre processor rather than the current i5 Dual only that would mean new motherboard hence why I’m thinking starting new build.

Corsair Carbide 200R Midi Belfry Instance

Intel Cadre i5 3570K Processor Overclocked to up to 4.5GHz

Chill Cooling Freezer 7 Pro Rev 2 CPU Cooler

Generic thermal paste

Asus P8Z77-V Sixty Motherboard

8GB Corsair PC3-12800 1600MHz DDR3 Retention (2 x 4GB sticks)

Chillblast AMD Radeon Hd 7770 1024MB Graphics Carte du jour

1000GB 7200RPM Hard Deejay – 6Gbps

24x SATA DVD-RW Drive

Xigmatek Premium Course 500W PSU

Onboard Loftier Definition Audio

Akasa AK-ICR-14 17 in i 3.5″ Internal USB iii.0 Card Reader

23″ Iiyama Prolite X2377HDS IPS Widescreen TFT Monitor


on July 21, 2017:

Hello, I take a 4-twelvemonth old PC and do a lot of heavy photo-editing using LR. I want to either upgrade or offset a new build that flies through this stuff.

Corsair Carbide 200R Midi Tower Example

Intel Core i5 3570K Processor Overclocked to up to 4.5GHz

Arctic Cooling Freezer 7 Pro Rev 2 CPU Cooler

Generic thermal paste

Asus P8Z77-V LX Motherboard

8GB Corsair PC3-12800 1600MHz DDR3 Retention (2 x 4GB sticks)

AMD Radeon Hd 7770 1024MB Graphics Card

1000GB 7200RPM Hard disk drive – 6Gbps

24x SATA DVD-RW Drive

Xigmatek Premium Grade 500W PSU

Onboard High Definition Audio

Akasa AK-ICR-14 17 in 1 3.v” Internal USB three.0 Card Reader

Soumitra Saha
on June 29, 2017:


It’s really very difficult to decide which processor is best for Afterward Furnishings. If I volition go with the i7 7700k, what should be the other best possible component i.e motherboard, RAM etc.

Brandon Hart (author)
from The Game on June 27, 2017:

You purchase a computer instance to house the PC. There are many options and are typically very affordable. I wouldn’t recommend using an old stock instance similar your Pavilion’s. If yous’re in the US, I typically recommend Amazon or Newegg. Promise that helps.

on June 26, 2017:

Ignorant question, but here goes….. What practice you phsyically start with as the “frame” or “torso” to hold information technology all together when building a custom computer please? I currently have an eight year sometime HP Pavilion I’grand thinking it Information technology has a virus because when I open IE, it opens hundreds of Windows that I tin’t close, and then eventually crashes. 🙁 Anyway I’k confused in the most basic and first step, ha, do I simply go buy a new basic calculator and pull things out and put your wonder recommendation in, or do I buy some kind of computer skeleton to stick information technology all in? So I wonder, could I maybe continue my one-time pavilion and just bandy things? I appreciate your commodity and help soooo very much. I didnt ever accept anyone to inquire until at present! Thank you so and then much, Brandon. Y’all’re the All-time and a calculator aaaaangle!!! XO OH, and do you past whatever risk recommend anywhere both affordable (sadly that’s about important) and honest, online to buy from delight? I just bought a refurbished monitor and information technology has patches of dead pixels and when I called to render it they said NO RETURNS, commutation only. Thanks again so much for your commodity and assistance. It’s so appreciated. Geeeez, distressing so long!

on June 20, 2017:

I am planning to build a video editing Pc based on a I5 processor for HD 1080p movies. Intel processors take an on board GPU. If I practice not add an graphics card to my PC what will I notice?

on June 12, 2017:


Are yous able to help me out here, love the write-up by the fashion.

I currently take the following set-up and although information technology does edit 4K video with no problems there is a “stutter” while playing any 4K content on my PC. I have the use of Windows Movie Maker, GoPro Studio, Adobe Premier Pro CC and Wondershare Filmora. It’ll edit in any of these programs but even in preview mode within them information technology’s still stutter on screen every bit well as in normal playing mode in VLC thespian. All 4K content yet plays perfectly fine on my 4K Television receiver including any edits I’ve washed with the PC.

This is my set-up….

Intel Cadre ii Quad Q9650 three GHz Quad-Core Processor

8GB DDR3 ram (max available on motherboard)

Radeon R7 240 graphics bill of fare at 2GB.

Windows ten (up to appointment) on 350GB IDE bulldoze

Additional 2TB SATA storage bulldoze.

Someone suggested that information technology may be the programme I’chiliad using, but 4 different programs and VLC player all can’t be wrong.

I’m thinking forth the lines of either the processor, Ram or the graphics card. I could only upgrade everything but if I don’t demand to then why should I. I know there are faster options these days but I’one thousand not really in any blitz and information technology currently edits at a reasonable rate for me.

I appreciate your help if you are able to.

Best regards,


Brandon Hart (author)
from The Game on June 06, 2017:

It actually all depends on what you’re looking for. First of all, the i7-3770k was a great CPU and one that I still use on my secondary house PC that I all the same regularly use for editing and other tasks. If you want to continue using it consider overclocking it for additional performance. Yep, y’all could certainly employ the GTX 1070 or GTX 1080 Ti with it and so upgrade the CPU when yous’re able to. And then, ultimately I approximate it simply depends on what you demand more. Maybe try it out with your electric current CPU and see where it gets you.

on June 06, 2017:

Thanks for the info Brandon!

I need to upgrade my GPU for certain. I am starting to get errors with exporting my videos from Premiere and my program monitor turns black sometimes, because my GPU can’t keep upward with the color correction and warp stabilizer effects on my 4k footage (Sony A7Sii).

I accept a custom PC but my friend helped me build information technology and so I need a picayune advice.

My processor is an Intel (R) Core (TM) i7-3770k CPU @ 3.50GHz (8 CPUs), ~3.9GHz

I would love to avert upgrading my processor and my GPU at the aforementioned fourth dimension…would I exist able to utilize either the EVGA GeForce GTX 1070 or the GTX 1080Ti with my processor?

Do I need to consider anything else when upgrading my GPU?



Brandon Hart (author)
from The Game on June 03, 2017:

I think price/operation you’ll be happy with the 1080 Ti. Yes, yous could go with the Titan XP, only this is almost every bit skillful and half the price.

Gerry Nason
on June 02, 2017:

Great article, Brandon. I am doing a build right now. I was pleased to see many of the components I’ve purchased already on your list. I however am struggling with the selection of a video carte du jour. I am running Windows x and volition be using:

• Intel Boxed Core i7-6850K Processor (15M Cache, up to 3.80 GHz) vi cores and 12 threads of processing power.

• ASUS LGA2011 5Way Optimization SafeSlot X99 EATX Motherboard (Rampage V Edition 10). Room for 128K RAM

• G.SKILL TridentZ Series 64GB (4 x 16GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Intel X99 Platform Desktop Retention Model F4-3200C16Q-64GTZSW

I am planning on running Adobe Premier CC as my editing software. I was leaning towards installing an EVGA GeForce GTX 1080 Ti FOUNDERS EDITION GAMING, 11GB GDDR5X, LED, DX12 OSD Support (PXOC) Graphic Card, with eleven Gbps GDDR5X retention, and 11 GB frame buffer. This runs virtually $700.

I can spend up to $1200 on the video card. Is in that location something improve out in that location that you can recommend based on the configuration and software I will be using. This is my first video editing build and it is different from my previous gaming builds, so I greatly appreciate your advice on this crucial component of the system. Thank you in advance.

on May 23, 2017:

RAM is not to be underestimated, I was focus stacking a picture the other day and was shocked when PS allocated gigabyte for gigabyte on my 16GB rig. I’m now building a 64GB motorcar.

Likewise, I/O speed is paramount. I hate having to wait for LR to load the side by side flick when I’g on the pick/reject step, so I’k getting dual M.2/500GB each in a RAID0 configuration; the two 256GB SSDs from my former rig will be made into another RAID0 array, doubling their speed as well and increasing storage size for a total of 1.5TB.

on May 22, 2017:

Hey Brandon,

Great article! This is exactly what I was looking for while thinking about build my first pc.

I am a media designer and am hoping to use zbrush, maya, and after effect heavily on my future pc. With a heavy corporeality of rendering from the maya and AE.

Are the amount of cores all I should be considering, when I want to make sure my computer is great render/workstation at heart but able to play some of the latest games if need exist?

What are some of the other things I should invest in to insure my machine is render/animation workhorse?

Besides what would be the next most powerful processor to a higher place the Ryzen 1700 mentioned above? Something that would exist along the same lines as having more processors for video editing but lets say I wanted to come across what the side by side level and cost would look like.

Ok last question, accept you heard of AMD’s APU series? Is this worth looking into? Would that series be less powerful than the build you lot described above?

Sorry for all the questions, fairly new to computers and trying to build the right machine for myself.

Thanks again for the super informative article!!

on May xx, 2017:

Hello, i demand good graphic card for Photo Editing?

Brandon Hart (author)
from The Game on May 08, 2017:

That’due south the question of the 60 minutes and it’s one that’s hard to respond merely because it depends on what blazon of work you do and where you find yourself spending the most fourth dimension.

from GREECE, ATHENS on May 05, 2017:

I would like to buy a new desktop. I am interested in video editing using sony vegas for 1080p clips that i create with my sony camera. Is it better to go with AMD Ryzen 5 1600 or i5-7600 ? Is it correct that more cores means faster video editing or should i get with i5 7600 which is faster for 1,two,4 cores working ? How faster do i become with ryzen in video editing percentage and how slower in other areas with maximum 4cores working ? Sorry for my english !!!

Brandon Hart (writer)
from The Game on May 01, 2017:

High capacity m.ii drives are adequately expensive simply if you lot’ve got a compatible motherboard and have the money, I’d say get with it.

on Apr 29, 2017:

Is at that place a reason you are non using an Grand.2 Drive?

Brandon Hart (author)
from The Game on Apr 27, 2017:

Linux is not much of a hardware compatibility upshot anymore, a lot of people like a dual-kicking (windows/linux) option but other than that I think yous should be good

Linux Newbie
on Apr 27, 2017:

I’chiliad thinking of building a auto similar this and running Linux on information technology, any chance y’all know if these components are Linux compatible? (Am new to the Linux design, but the freeware is enticing.)

on Apr 15, 2017:

If you lot are editing 4K video, wouldn’t information technology exist improve to employ a 4K monitor like the Dell P2715Q? Merely wondering…

on April 14, 2017:

Hey Brandon,

Nice article.

I am interested in a build that includes the following (taken from the $1500 pick):


-GTX 1070

-Corsair Vengeance LPX 8x2GB 3000MHz

-240GB A-Data SSD & 1x 1TB HDD

but I am non interested in the recommended motherboard, optical bulldoze, cpu cooler and the case.

This is because my secondary goal is to brand this machine small enough so I tin check information technology into my luggage.

What motherboard, ability supply and case would y’all recommend me to use in conjunction with these components then?

on April 14, 2017:

Hey Bradon,

Can you recommend a 1k setup for a smaller PC case? I don’t similar machines that are too large

on April 05, 2017:

Thanks a lot for your guide, I have Edius Editing software and a Blackmagic Deadlink 4k Extreme PCI carte.

Desire to have Thunderbolt 3 and USB 3.ane and support for my be blackmagic and EDIUS Workgroup 8.2.

So do I go with Asus X99-East II or take new Z280 mobo ?

Can you recommend me a pc setup for my edius and blackmagic menu with 64gb ram and 1TB Samsung pro 850. please help me

Brandon Hart (author)
from The Game on March 30, 2017:

You’ve gone for the i7-7700k – and a relatively cheap motherboard. The motherboard is fine, merely for the “k” version of the processor, most exercise a solid overclock. So, I’d go for a Z270 board if you’re going that route. If you only want to get an i7 7700, that motherboard should be perfectly fine. Particularly, if you’re able to classify more than of your budget to other boards. In terms of clock speed, it actually depends on what you’re doing, the programs you’re using, etc… Yet, I will say the i7 7700 really doesn’t take a lot to worry about when it comes to that area. Promise that helps.

on March 29, 2017:

Hi Brandon. Cheers for this very useful article. It answers lot of my questions.

I would like to put together a figurer principally for image editing (LR+PS). When choosing CPU how much the processor’s clock frequency is important? In other words: does 4+ GHz is necessary or 3.6 GHz would exist sufficient? Before reading your article I was thinking about the following CPU-Motherboard combination: i7 7700K four.ii GHz + MSI H110M-PRO. Is information technology a off-white combination or the i7 is a kind of too much for the motherboard?

Give thanks you in advance for your assistance!

Brandon Hart (author)
from The Game on March 23, 2017:

Yep, the motherboard here isn’t compatible – y’all need an AM4 motherboard (x370 b350 chipset etc)

Video Editing Build Hopeful
on March 23, 2017:

Peachy read, thanks! What exercise you think of this build, volition information technology work (and be a fauna?):

Fractal Design R5

Assus X99-Due east

Ryzen R5 1600X (or Ryzen 7 1800X)

GeForce GTX 1080

32Gb (4x8Gb)

1 Tb SSD + three ten 3Tb raided

power cord

Am I missing anything? Is everything compatible? (This would be my first PC build.)

Brandon Hart (author)
from The Game on March 18, 2017:

If that’s the difference I’d definitely go for it.

on March 18, 2017:

Hi Brandon. Thank y’all for your input! When it comes to AAE I usually render some basic stuff similar audio spectrums and lower thirds with glow and shadows put on, that’s all. I rarely employ some effects from Trapcode suite or Chemical element 3D etc. In Vegas I use typical build-in transitions, sometimes ProType Titler.

I think in terms of GPU information technology’due south worth mentioning that I’m planning to buy 2560×1440 monitor, virtually likely Dell U2715H (I saw that you also recommend it, so that’s awesome).

In that case, would RX480 4GB be plenty?? 480 has higher retention clocks and at the moment cost divergence between 470 4GB & 480 4GB is but effectually $13 in my local shop.

Brandon Hart (author)
from The Game on March 17, 2017:

In terms of the GPU in Afterward Effects, it’southward somewhat limited to the 3D Ray Traced Render Engine and OpenGL preview. Quality Ram and a adept Processor is more important for AE.

For rendering, yous’ll have to decide how much GPU you lot need (make sure yous enable GPU acceleration). Clearly the better the GPU and CPU in this situation, the shorter your return times (simply there are diminishing returns). I don’t believe VRAM at this level is much of an effect in Sony Vegas from what I’ve read. So, I’d probable go with the RX 480 or fifty-fifty the 470 as information technology’s considerably cheaper. If you lot take a pretty general workload merely having a mainstream GPU in many cases, is good enough.

GPU Usage is crucial in certain types of workloads. Then, it might be a practiced idea to check out some benchmarks in what you do the well-nigh and go with that. For power, I’m always tempted to go to the side by side pick up. You’re fine without it if yous don’t add much in the time to come. Keep in listen that your PC won’t be running anywhere near the max load typically. But, it depends on if you lot want that cushion or non.

on March 17, 2017:

In a 2-3 months I’grand going to build a new setup for rendering. I render some things in After Furnishings and then I use Sony Vegas Pro 13 to render the whole thing (footage, furnishings + music). What practise yous remember most this configuration?

Ryzen 1700X (overclocked to 3,9GHz)

ASUS Prime number B350-PLUS

MSI RX 480 Gaming X 8GB

G.Skill 2x8GB 3200MHz

240GB GoodRAM Iridium PRO SSD

2TB WD Blue

SilentiumPC 550W Enduro FM1 (with eighty PLUS GOLD cert)

A few questions:

1. Is this 8GB GPU an overkill for rendering and 4GB version would be enough? Once more, I’chiliad not a gamer, I’1000 just non sure how much GPU is affecting rendering. Always thought that CPU and RAM is the most crucial.

ii. Amend to get with AMD or Nvidia for this usage? If I would utilise only Adobe products, I would definitely go for Nvidia and CUDA support, but I’m looking for the best counterbalanced solution for these 2 programs.

3. Is 550W enough? I used PSU calc and information technology says Load Wattage: 438 West and recommended 488W. In that location is some overhead, but I don’t desire the fan spinning too fast most of the time. Should I consider 650W?

Thanks in advance!

Greetings 🙂

Pugal, Chennai, Republic of india
on March 15, 2017:

I read this article and learn about latest versions of estimator. So dainty

evil musquito
on March 14, 2017:

as a completely stupid person when it comes to PC’s that is both a gamer and working with 2k and 4k video editing, i salute you!

i hope i don’t burn down down the business firm when i build it.

Brandon Hart (author)
from The Game on March 14, 2017:


That actually depends on what yous practice. Obviously M.ii is faster but you lot may not ever notice it if the SSD is already good enough. Make sense?

Jose Garcia
on March 14, 2017:

Great information. Just I similar to ask you if is worth it but a lot expensive Thousand.2 unit. Like Samsung EVO 960 500 GB. For 260$. The functioning it’s really amend?

And about the software. Windows ten is better choice vs windows 7? I think the software rest power to the cracking components

Jeff Rome
on March 02, 2017:

Thanks for your awesome data! I accept an older Velocity Micro with an Intel i7 860@2.8GHz and Nvidia Geforce GTS 250 graphics…..Yes,I know it’s a dinosaur, but it still works with idiosyncrasies ;-). I don’t do games, but my main purpose is photo & perhaps video editing. I just bought a BenQ BL2420pt qhd monitor and realize I need to upgrade my graphics card &/or motherboard for it’s full potential.

I’ve been researching latest Kaby lake, graphics and MB’s. Hither’s what I’yard thinking: GIGABYTE GA-X99P-SLI (rev. 1.0) LGA 2011-v3 Intel X99 SATA 6Gb/s USB USB 3.0 ATX Intel Motherboard or ASUS X99-M WS mATX Dual Intel LAN with M.2/USB 3.ane/ 3T3R Wi-Fi Onboard Workstation Motherboard and the Intel Core i7-7700K Kaby Lake Quad-Core 4.2 GHz LGA 1151 91W BX80677I77700K Desktop Processor. Looking at the processor, the graphics information technology has supports more than my current card. I do take a limited budget ($g) but I’d like to take advantage of latest engineering for the time to come. I’d too install my Samsung 850 500 Gb ssd to run OS. I realize this is more than I need, just I’d rather bite the bullet now than upgrade in 2 years. Whatever thoughts are profoundly appreciated! Thanks!

Brandon Hart (author)
from The Game on Feb 27, 2017:

Something like the Elgato Video capture would work. I remember yous can become 1 for around $eighty.

Jim Winder
on February 27, 2017:

what practise yous suggest for a Video Capture Card…needing to covert my VCR tapes to digital

on February 18, 2017:

Thank you lot for taking your time to share your cognition.

Kevin Browning
on January 03, 2017:

This is very helpful. All I want to do is make blu rays of my home-made movies.

If I went with the $1000.00 machine, is there a video editor you’d recommend (does it come with blu ray called-for ability, or is that something else I would need to buy).

I’k wondering what other expenses I will see. I don’t demand a fancy monitor (can I use my HDTV as a monitor?).

And I have no intention of using this estimator for internet browsing. I just want to brand blu rays with it. Can I avoid ever connecting to the net, or is that required to actuate software?

What am I probable to spend, in total, in society to beginning making blu rays of my adventures? And do yous think that mod software volition recognize my Sony FX1 (mini DV)?



on December 01, 2016:

RAID is possible with using 2 SSD drives – so there you get more speed for both – system and applications on one side and scratch on other side.

on November 22, 2016:

What if you want to use information technology for 3d rendering? And a 3k upkeep.