Canon Stabilizer Mode 1 Or 2

By | 14/09/2022

Prototype Stabilizer

You tin utilize the image stabilizer in AF, PF, or MF mode.

Gear up the STABILIZER switch to ON.

  • If you are not going to use the image stabilizer part, set up the switch to OFF

Select the stabilizer fashion.

  • Way 1: Corrects vibrations in all directions. It is mainly effective for shooting still subjects.
  • Style ii: Corrects vertical photographic camera milkshake during following shots in a horizontal direction, and corrects horizontal camera milk shake during following shots in a vertical direction.
  • MODE 3: Corrects vibration just during exposure. During panning shots, corrects vibration during exposure just in one management the same as MODE 2.

Starting time press the shutter push button down halfway, and so press downwards all the way to accept the flick.

  • Mode 1, 2: Press the shutter button downwardly halfway to stabilize the prototype in the viewfinder and enable stabilization.
  • Mode 3: Press the shutter down halfway to initiate computation of stabilization, and so printing down all the fashion to enable stabilization.

Tips on Using the Paradigm Stabilizer

Fashion one

  • In semi-darkened areas such equally indoors or outdoors at night.
  • In locations where flash photography is prohibited, such as art museums and theater stages.
  • In situations where your footing is uncertain.
  • In situations where fast shutter settings cannot exist used.

Way 2

  • When panning subjects in motion.


  • Since camera shake is stabilized only during exposure, post-obit a subject is easier such as when shooting a fast and irregularly moving actor during sports photography


  • The Image Stabilizer cannot recoup for a blurred shot acquired by a subject that moved.
  • Set up the STABILIZER switch to OFF when you are taking pictures using the Bulb setting (long exposures). If the STABILIZER switch is prepare to ON, the image stabilizer role may introduce errors.
  • The Prototype Stabilizer might non exist fully constructive in the following cases:

• You shoot from a violently moving vehicle.

• You lot move the photographic camera dramatically for a panning shot in Style 1.

  • The Paradigm Stabilizer consumes more than power than normal shooting, so fewer shots can be taken if you use the office.
  • The epitome stabilizer operates for about two seconds even when your finger is off the shutter push button. Do not remove the lens while the stabilizer is in performance. This will cause a malfunction.
  • With the EOS-1V/HS, iii, ELAN 7E/ELAN 7/xxx/33, ELAN 7NE/ELAN 7N/30V/33V, ELAN Ii/ELAN II Eastward/50/50E, Rebel 2000/300, IX, 9 Lite/IX7, and D30, the Image Stabilizer will not piece of work during self-timer operation.
  • Using a tripod too stabilizes the image. However, depending on the kind of tripod and shooting conditions, sometimes it may be meliorate to turn off the Epitome Stabilizer function.
  • The stabilizer is equally constructive for handheld photography and photography with a monopod. The Image Stabilizer consequence may be reduced, however, depending on the shooting environment.
  • The Image Stabilizer as well operates when the lens is used with extension tube EF12 II or EF25II or the extender EF1.4x III or EF2x Iii.
  • Depending on the camera there may be epitome milkshake, such as after releasing the shutter. Nonetheless, this does not affect shooting.
  • If y’all set the camera’s Custom Office to alter the assigned button to operate the AF, the Epitome Stabilizer will operate when y’all press the newly assigned AF button.