open, you are using your
and everything seems fine. A footling while later in the session, yous will notice that the eraser
working. Why is that?
Photoshop Eraser Not Working?
If your Photoshop Eraser is not working, the trouble can be stock-still past:
- Unlocking your layer
- Remove whatsoever selections with Ctrl+D
- Select the layer instead of the layer mask
- Making certain you lot are not erasing on a duplicate layer
- Finally, by resetting the Eraser tool
Why is My Eraser Not Working in Photoshop?
Well, there are a couple of potential reasons why the eraser can cease working, and with this article, I will help you
the eraser tool.
If you would prefer to spotter this in activeness, then I take compiled the near common reasons why the Eraser Tool doesn’t work in the video beneath.
Reset the Eraser Tool
The get-go thing you should endeavor is to
Eraser Tool. You tin can do that by right-clicking the Eraser Tool. Yous can detect it in the left corner upwardly in the
Options Bar. When y’all
the tool, you will run across the
Reset Tool Option, select it, and y’all are washed.
The Layer Yous Selected is Locked
the background layer by default. Besides, sometimes you can
the layer by mistake. It happens. When your layer is locked, the
cannot work. So, when you try to use it, it shows an
telling y’all why you can not utilise the Eraser.
To prepare this, all you need to do is to
the layer, and y’all can employ the
Y’all can do that by clicking on the
above the layers.
Y’all Have Made a Selection of a Part of the Image
It is possible that you selected a part of the image by fault or forgot to deselect it. Or mayhap, you have clicked on the epitome while using some other tool, like
Patch Tool, Lasso Tool,
or something similar that,
where yous take selected but a pixel of the photograph, and y’all do not really run into the
Select Border. In that case, the eraser tool will not piece of work. It volition not work because only pixels within the called region can be edited or erased.
You can ready this if you lot click somewhere outside the workspace to drop your option, or, you lot can but use the shortcut to deselect the area.
You lot are Working on a Layer Mask
Whenever y’all have a layer mask active, your eraser works on the mask rather than the image or the normal layer.
So, if you created a layer mask by mistake or yous do not need information technology anymore, you can delete the mask and keep working on the previous layer. You can practise that past right-clicking on the mask layer and choosing the
Delete Layer Mask
Or you can click on the
at the bottom of the screen.
Simply, if you need the mask and want it active, and then you can just
the main image layer next to the mask and the eraser will now piece of work on that main image layer.
You Take a Duplicate Image
may non be working if you have a
or a background that contains the same colors or pixels as the area y’all are trying to erase. In other words, you may be erasing your image, only the layer to a higher place or below your current layer may appear to be the aforementioned equally your current layer.
You can set this by turning off the layer visibility. Or past deleting the duplicate layer. To delete the layer, you tin can click the
at the bottom of the screen or right-click the layer and choose the
You can too merely select the layer and press the
button on your keyboard.
Problem with the Pressure-Sensitive Pen Settings
If you apply a tablet, it may cause problems with the
Eraser Tool. The settings of your pen may affect Photoshop’s
erase tools. In rare cases, this can happen even if y’all practise not use a tablet.
And so, to fix this, you need to bank check the tablet’s settings first and endeavour to fix it from there. Or the alternative is to modify the
Yous can do that with the following steps:
ane. Click the
Brush Settings Panel
Brush Settings Panel
will show up, where you will accept a agglomeration of different settings for the brush. Y’all will have to notice every setting that allows the use of
and plow them OFF.
3. When you lot showtime open the
panel, by default the last section yous had open volition exist selected. Offset with the
section, where yous will find several
Controls (Opacity, Menstruum, Wetness, and Mix). Virtually of them should be grayed out. Only, for each ane that is not, in the
Drib-Down Menu, prepare the control to
4. You lot volition have to repeat the same process for
section, there are three
Roundness. Set all of them
OFF. Don’t worry if some of them are
grayed out. Ignore those.
Echo the process for the
section. It should be ready to
Practise the same for the
section by turning
Count Jitter controls.
Is the right eraser tool selected?
Sometimes, you might not be using the
at all. So, earlier you do anything else, first cheque if y’all have selected the correct
Eraser Tool, considering in that location are a couple of them, including the background eraser and magic eraser.
In order to run into if you are using the correct
Eraser Tool, get to the
where the Erase Tool is,
on the icon, and brand sure y’all are using the ane you lot need.
Is the Layer Visibility Turned Off?
You need to be sure that the layer’s visibility is
turned ON. If the layer visibility is
turned OFF, an
will testify up when y’all attempt to utilize the Eraser Tool on it, telling you lot why the
is non working.
You lot can plough
the layer visibility by clicking the little
in the left corner of the layer.
Or yous tin can use the shortcut:
It tin can happen that yous can turn off the layer visibility by mistake, but don’t see the
showing upward when you endeavour to erase something. This is because the layer you intend to erase from has the visibility
turned OFF, simply y’all accept another layer selected where the visibility is
ON, and are actually erasing from that layer, rather than the one y’all intend to.
Then, brand sure the visibility on the layer you are working on is always
ON, and bank check what layer you are working on before you lot even begin to erase something.
Are All of the Layers are Turned On?
When you work in Photoshop, it is very common to have all of the layers you lot are working on
turned on, merely this might cause problems if you but intend to erase a very specific part of your paradigm, particularly if it is simply on ane layer.
If all of the layers are the aforementioned, make sure the layer where you desire to employ the eraser stays turned on while you lot have to turn the
on the other layers.
Otherwise, you might be using the erase tool on
every layer, and delete different parts of the motion picture on unlike layers. Besides, if all the layers are turned on, you might non even see the erased area unless information technology is the height layer.
You Have Selected the Incorrect Layer
Information technology is very common to use the tools on other layers by fault. It happens to everyone. Then, make sure that you lot are using the
on the layer yous need to erase on.
For instance, if you are erasing something on the second layer and the pinnacle layer is
turned on, you lot will not be able to run into the erased surface area. In this case, if there are layers you have worked on already and are different, you do not have to turn off all of the layers. You should only
the visibility of the layers higher up the one you are working on.
Is the Erase to History turned off?
Erase to History
selection is a flake tricky. It is a helpful option in some circumstances, but isn’t something you ever want selected.
The Erase to History tool is used to recover the erased area. And so if the
Erase to History
checked, then the
will not piece of work because when you utilise it with the erase to history option ‘on’, it actually brings back what you erased before.
So, make certain the erase to history pick is not selected.
Photoshop Eraser Not Erasing 100%
If your Photoshop Eraser is not erasing 100%, then you are nearly likely non using the default black and white foreground and background colors within the tool. Printing D to set up your colors to default and to fix the trouble.
If that doesn’t work, then allow’southward get through each of the
Eraser Tool Settings
to help you get your tool setup correctly.
Whenever yous commencement using the Eraser Tool, the first thing to do is check that its settings are right, according on your needs.
Menstruation and Opacity
Maybe the castor you are using was created with lower transparency or flow setting?
Unless you take this prepare to 100% opacity, you might remember that y’all accept a faulty brush.
The erase tool will non erase 100% if yous have changed the
With the changing of the opacity and flow, you are smoothening the brush and decreasing its opacity. So if y’all need the eraser tool to erase 100%, make sure the opacity and flow values are at 100%.
Y’all can find the opacity and flow fields in the
at the top of the screen.
Hardness and Size
If you take changed the the
hardness, information technology may appear that the eraser is not working. The thing is, the eraser tool is working, but you can not run into information technology considering information technology is too
modest, or too
Y’all can cheque the brushes’ settings in the
Options Bar, by clicking the
Or you can
anywhere on the screen, while your tool is selected, and the aforementioned window will pop up.
If in dubiety, increase both the size and hardness, until you lot can clearly see the eraser working.
The Default Colors for the Brush Tool are Inverse
There is one more matter that causes the Eraser non to work at 100%. The problem is likely your
colors of the brush are not ready to the
Default Colors. If y’all intend to erase straight on your
with the eraser tool, the colors must be set to its default, which is
Blackness and White.
Yous can modify them by double-clicking on the colors by clicking the
When you double-click the icons, the
Color Picker Carte du jour
will prove up, cull
Background Colour, select
and you are proficient to get.
Or, yous tin practise that by pressing the
button on your keyboard. And it will automatically change them to blackness and white. Yous can cull between the two colors to erase on your mask by clicking on the
Double Arrow Icon
Toolbar, or by clicking
on your keyboard.
Press your Caps Lock Key
It ofttimes happens when you work, or write text that yous use the
Caps Lock. Only you might also happen to forget to turn information technology
If you take the Caps Lock turned On, then you will not run across the
Eraser Tool Brush, but y’all will see a
It is a feature people apply when they need to run across the precise eye of the castor.
Have you selected the right Castor Type?
You might exist using a non-standard brush type, with incorrect size, hardness or dynamics. An like shooting fish in a barrel style to ready this is to go into the eraser brush options and choose one of the
from the presets.
In that location can be a number of possible reasons why the Eraser Tool doesn’t work in Photoshop, merely you can ultimately fix it by resetting the Eraser by selecting it with E, and then going to the Eraser icon in the toolbar and clicking the dropdown and using the cog bike icon to admission a menu with ‘Reset Tool’ as an option.
If you still take issues after trying all of these solutions, then I would recommend that yous contact Adobe Customer Back up, who should be able to guide yous to a solution.
Read More than:
Clone Stamp tool not working?
Export SVG from Photoshop
How to remove white background in Photoshop
How to dodge and burn in Photoshop
How to remove lens flare in Photoshop
Unmerge layers in Photoshop
How to remove a color in Photoshop