How To Use Eraser In Lightroom

by -111 views

In this tutorial, I will explain how to use the Lightroom Adjustment Brush Tool.

This is a feature that allows you to make adjustments in specific areas instead of in the whole image.


What Is the Lightroom Adjustment Brush Tool and What Can You Do With Information technology

The Lightroom Adjustment Brush is one of the virtually useful tools Lightroom has to offer to brand localized adjustments to specific areas in your paradigm.

You lot can use it for increasing or decreasing exposure, modify the saturation, contrast, clarity or practise any other basic adjustment.

You lot tin do several adjustments with the same brush. Or yous can use different brushes in the aforementioned pic. Every bit you can come across, the brush tool adds a lot of new options to your editing!

How to Access the Brush Tool in Lightroom

Equally with any other aligning tool, the Brush is in the Develop module. It is located below the right bottom corner of the histogram.

A screenshot showing how to find the Lightroom Adjustment Brush Tool

After clicking on the Brush icon (or using the shortcut Thou on your keyboard), you will access the Brush Tool panel.

A screenshot showing how to find the Lightroom Adjustment Brush Tool

In one case you’ve selected it you tin can “pigment” the surface area that y’all desire to modify on your paradigm. Drag the mouse cursor over information technology while pressing the left mouse button.

After you’ve “painted” an expanse you will run across that there is a pinhead on the spot where you’ve started painting. When the brush is active, the pinhead will expect similar a footling white circumvolve with a black dot in the middle.

In this case, y’all tin can go on painting and practice modifications in your brush.

A screenshot showing how to use the Lightroom Adjustment Brush Tool

When you end, press Done to deactivate the brush. The pinhole will then appear like a elementary white circumvolve.

A screenshot showing how to use the Lightroom Adjustment Brush Tool - inactive brush

Past clicking on the pinhead you tin can reactivate the specific Brush. Y’all can make new changes even if you went out of information technology and went to work with other tools or painted new brushes.

Activate the Castor Mask Overlay to Command the Brushed Expanse

I of the challenges of working with the brush is that yous don’t run into the areas you have covered with it.

Lightroom’s solution to this problem is the Mask Overlay. This is a visual effect that shows the brushed area in red while the brush is active.

This effect is non shown in the last image. As you lot piece of work, you can switch it on and off. You tin can control whether the Mask Overlay is on or off by checking the Mask Overlay box.

A screenshot showing how to use the Lightroom Adjustment Brush Tool

Become familiar with the Brush Tool: Result Section

The Brush tool contains the adjustment sliders that are like to the ones you employ in the Basic panel of the Develop Module. The first ii sliders, Temp and Tint, control the white balance settings.

With the Temp slider, you can control the colour temperature and brand information technology cooler or warmer. With the Tint, you lot can requite a magenta or green color.

A screenshot showing how to use the Lightroom Adjustment Brush Tool

The half-dozen sliders below Temp and Tint are the basic adjustments such equally exposure, contrast or clarity. They piece of work in the same way as they do in the basic panel.

A screenshot showing how to use the Lightroom Adjustment Brush Tool

The last iv sliders let you lot to correct issues caused past the camera sensor such as noise (grain), moiré (pattern distortion) or defringé (chromatic abnormality).

A screenshot showing how to use the Lightroom Adjustment Brush Tool

You will find a color palette in case y’all want to add a color cast to your brush.

A screenshot showing how to use the Lightroom Adjustment Brush Tool

Utilize the A-B selection to hands combine two Ligtroom brushes

In some cases, you might need to apply two carve up brushes. For example, you lot might need a big brush for big areas and a small one for details.

Instead of changing the brush size all the time, you lot can use the A-B option.

A screenshot showing how to use the Lightroom Adjustment Brush Tool

When you select the brush, y’all are in fact using the A brush. That is the default option.

A screenshot showing how to use the Lightroom Adjustment Brush Tool
With the A brush I increased the clarity of the windows to enhance details and textures

If you lot need another castor, but you lot also know you will need to return and utilise the adjustments settings again later, you lot can click on B. Adjust the settings to your new needs and brush.

A screenshot showing how to use the Lightroom Adjustment Brush Tool
With the B castor I decreased the clarity and the saturation of the wall.

Want to come back to the original castor? Just click on A. Doing so, you will save a lot of fourth dimension readjusting the brush settings every time.

Correct Mistakes With the Eraser Selection

Nosotros all have these moments: you piece of work carefully, but and then you get distracted, your mitt slips, yous’ve painted an area y’all didn’t hateful to.

Does that mean you have to remove the brush entirely and showtime all over once more? Of form not! For those moments we accept the Eraser.

This option allows usa to ready and take out parts of the brush we didn’t hateful to paint over. To utilize it, all you have to do is click on “eraser”.

A screenshot showing how to use the Lightroom Adjustment Brush Tool - eraser option

Become over the areas you want to erase, just as if you were using the castor tool normally. The eraser will remove the brush effect, but won’t delete annihilation from the original image.

If you are using the Mask Overlay you volition meet that the red color of the mask overlay disappears from the expanse you’ve erased. To go back to the brush, check A (or B if you want to use the 2d brush option).

A screenshot showing how to use the Lightroom Adjustment Brush Tool
I brushed over the bricks by mistake, as you lot can come across thank you to the mask overlay.
A screenshot showing how to use the Lightroom Adjustment Brush Tool
I made sure to have the brush active and then I click on the Erase tool.

Select the Size and Feather of Your Brush Tool

One of the most common adjustments yous need to practice to your brush is irresolute its size. You’ll need to do this to fit information technology to the surface area you are working in.

You can do information technology using the size slider. Just yous can practise it even faster using the shortcuts [ to make it bigger and ] to make information technology smaller.

This fiddling pull a fast one on will save yous a lot of fourth dimension editing.

A screenshot showing how to use the Lightroom Adjustment Brush Tool

Feather defines the transition zone betwixt the brushed and non-brushed area. A small feather area means that the brush is harder and that the edges between areas are more than defined and noticeable.

A big feather makes the transition much softer and gradual.

Suit Flow (Opacity) and Density to Control the Strength of the Castor

A great matter about the brush tool is that y’all tin can control the intensity (or forcefulness) of the painted effect. It goes from 0 to 100% coverage when you lot pigment.

You have two sliders that control information technology: flow and density.

A screenshot showing how to use the Lightroom Adjustment Brush Tool

Flow regulates the intensity. If you lot add castor strokes, the intensity of one adds to the previous one. This gives you lot more flexibility and control painting. You tin can add the upshot gradually by adding stroke over stroke.

Density too affects the intensity of the effect. It doesn’t have the summing effect that Menstruum does.

The Auto Mask Will Aid Yous to Brush Inside the Borders

Ane of the challenges with the Adjustment Brush tool is to keep within the borders of the area we want to change. The Motorcar Mask is a feature which helps u.s. deal with this problem.

To activate the Auto Mask feature you need to cheque the box right next to the words “Auto Mask”. You lot’ll find this at the bottom of the Brush driblet-down menu correct nether the “Flow” slide bar.

A screenshot showing how to use the Lightroom Adjustment Brush Tool

How to Preview and Reset the Brush

If you want to compare how your image looks like earlier and later on the brush, click on the little switch in the left corner of the brush panel.

A screenshot showing how to use the Lightroom Adjustment Brush Tool

If you want to reset the brush, click on “Reset” and the brush will exist deleted from the image.

A screenshot showing how to use the Lightroom Adjustment Brush Tool

If you just need to reset the slider values you don’t have to do information technology one past one. Double click on “Effect” at the top of the adjustment sliders. Lightroom will gear up all of them at once back to nix.

A screenshot showing how to use the Lightroom Adjustment Brush Tool

Use Castor Presets to Salvage Time

Yous can either adjust the settings until you lot become the desired event or you can use a pre-installed Lightroom preset.

Click on the two little arrows next to the word “Custom” in order to open a drib downwardly carte that shows all the brush presets you tin utilise.

A screenshot showing how to use the Lightroom Adjustment Brush Tool

Select ane and brush over the area you want to edit. Lightroom’southward original presets might give your prototype an artificial look considering they are quite farthermost.

Yous can change them until you get the effect yous similar.

A screenshot showing how to use the Lightroom Adjustment Brush Tool

Yous can as well create your own presets and save them for the future.

To practice so, click again on the two little arrows next to the discussion “Custom” to open the drop-down bill of fare. Look for the line that says “Save current settings as New Preset”. Click on it, give a name to your new preset and click “Create”.

At present your preset volition appear in the presets list.

A screenshot showing how to use the Lightroom Adjustment Brush Tool

Using presets volition non only make your workflow much easier and faster simply it will also be more consistent because yous will use exactly the same settings.

Examples of How to Improve Your Images Using the Lightroom Brush Tool

Recover Details From Shadows

The adjustment brush is useful to recover details from both the dark and the low-cal areas of your photos. Paint the area yous want with a brush tool, edit and conform its exposure.

You lot can also decrease the shadows. After making these adjustments the area might look a scrap flat. You might need to increment the dissimilarity a fiddling flake.

an image of a chestnut on a rocky floor
In the original image the chestnut is a bit too dark, so y’all tin’t see the details.
A screenshot showing how to use the Lightroom Adjustment Brush Tool
I used a brush to increase the exposure and open the shadows.
A screenshot showing how to use the Lightroom Adjustment Brush Tool
At present you tin can see much ameliorate the chestnut details.

Enhance Details in the Highlights

To heighten details from areas that are too bright, utilise a brush tool and accommodate the highlight by moving its slider to the left.

Y’all can also try to decrease the exposure a bit. Take intendance because this aligning is easily noticeable.

To enhance the details, even more, y’all can increment the brush clarity to brand the textures pop.

purple flowers in a meadow on a cloudy day
The clouds in this image are impressive, merely they don’t have much detail on them.
A screenshot showing how to use the Lightroom Adjustment Brush Tool
I used a castor to recover detail in the highlights, decrease a bit the exposure and to increase clarity to emphasize the cloud details.
purple flowers in a meadow on a cloudy day
Now the clouds look a flake more than defined.

Skin Softening

The castor tool is used a lot in portrait photography to make the skin of your subjects smoother. Employ a castor with negative clarity. Take intendance not to exaggerate with it because so the pare will look bogus.

To have more control, I like to use a brush flow effectually 60-70 and then the consequence will be more subtle with every single stroke rather than using the castor at full strength (flow 100).

If the skin smoothing is enough and it looks natural, you stop brushing. If you want to smooth it more, you lot can add more brush strokes on elevation of the previous ones and the effect will accrue.

If your model´southward skin is underexposed, y’all can also add together some light by increasing the castor exposure a bit. This will help to make imperfections in the skin much less noticeable.

a portrait of a female model sitting on the beach
This is the original portrait
a screenshot of editing a portrait of a female model with the lightroom adjustment tool
I brushed to decrease the clarity of the pare. I also increased a bit the exposure. I kept the brush menstruum to around 60.
a portrait of a female model sitting on the beach
In the final image, the skin looks smoother and natural.

Conclusion

The Adjustment Brush is a very versatile and powerful tool that enables you lot to make localized adjustments in your photos.

Getting familiar with it will make your workflow more than efficient and volition enable you to create effects without switching to Photoshop to end editing your images.

Why non bank check our posts on how to whiten eyes and teeth or edit mural photos in Lightroom next!

Source: https://expertphotography.com/lightroom-adjustment-brush-tool/