Instax Mini 9 Printing White Pictures

By | 27/08/2022

There’south nothing as disappointing for an Instax user every bit waiting for a photo to develop, simply to notice that it has turned out completely white.

When this happens, information technology almost ever means that the paradigm has been overexposed.

Overexposure is caused when the pic is exposed to too much lite. Likewise, underexposure (excessively nighttime images) occurs when non enough light falls on the film.

If you are reading this article, you are probably wondering why some of your Instax Mini ix images have turned out overexposed. Well, beneath we (hopefully) have the answer!



Ideals statement: We bought the Mini ix for our personal use. We were not asked to write annihilation about the camera, nor were nosotros provided with any sort of compensation. Within the article, at that place are affiliate links. If you buy something afterward clicking the link, we volition receive a modest commission. To know more about our ethics, you tin can visit our full disclosure page. Give thanks you!


The wrong setting was chosen

On the Instax Mini 9, you lot can choose between five dissimilar brightness settings on the lens adjustment dial:
Very Sunny, Sunny, Cloudy, Indoors and Loftier Key.

Each brightness setting corresponds to an aperture value – the higher the value, the smaller the aperture, and the less light hits the motion-picture show.

  • Very Sunny:
    f/32 (smallest aperture; very little light immune in)
  • Sunny:
    f/22
  • Cloudy:
    f/16
  • Indoors:
    f/12.seven (largest aperture; lots of light allowed in)

  • Loftier Key:
    Allows you to have brighter images with a softer look. Note that the camera volition never choose this setting on its ain. More on this setting further downwardly.

The camera will automatically suggest the ideal setting by reading the intensity of the ambient light and illuminating the appropriate lamp on the dial.

The camera has suggested Very Sunny past lighting up the corresponding icon on the effulgence adjustment dial.

Overexposure occurs when y’all choose a dark setting (such as Cloudy or Indoors) on a bright and sunny day. This is considering y’all are telling the camera to permit more light striking the film than is actually necessary for a proper exposure.

Beneath is a good case of overexposure occurring on an overcast day. Although the camera was telling me to use Sunny, I decided to use Cloudy considering I idea information technology was besides overcast to use one of the brighter settings. Information technology turns out I should have listened to the photographic camera! 🙂

Another good case is the pair of images below of my “improve half” Mathieu eating an water ice cream. I accidentally forgot to switch the setting from Indoors to Very Sunny and the resulting exposure is completely washed out. Since I liked the image, I decided it was worth re-taking – this time with the Very Sunny setting – and information technology turned out fine.

The take-home message hither is before taking whatever shot, check to encounter which setting the camera has recommended and modify it accordingly. Otherwise you lot might be in for a scrap of a surprise!


The film was already exposed to light

One of the biggest mistakes you can brand with instant photography is exposing your moving-picture show to low-cal before you lot’ve fifty-fifty begun taking photos, as doing so will plough completely overexposure the entire pack.

This can happen if you happen to be in direct sunlight while loading the film pack, or if you lot open the dorsum of the camera and remove the film before you’ve used it upwardly.

In either case, the only solution is to throw the overexposed pack abroad and start again!


Your subject field is too bright

A few times while taking pictures on very bright, sunny days, I found that my images were brighter than I wanted them to be even though I was using the Very Sunny setting.

Take this picture of Aberystwyth Pier for example. Despite having used the Very Sunny setting, the prototype is still quite bright in certain areas of the frame, particularly the pier and the colina in the background.

There isn’t much you lot can do in these situations except to shoot later in the twenty-four hours or look for some clouds to scroll in.

Likewise avoid shooting in the direction of the sun: not only will any epitome you lot take be completely overexposed only fifty-fifty more importantly, you lot take a chance damaging your eyesight.


Overexposure for artistic upshot

Though no one wants to stop upwards with a “polar bear in a snowstorm” type of image, many photographers exercise enjoy slightly overexposing their images for creative result.

The most common practice with the Instax Mini ix is to choose the setting that is one stop darker than the setting the camera suggests. (Recall, the darker the setting, the more light the camera lets in!) In the case of Very Sunny, that would be Sunny, and so on. Doing so can give your image a bright and cheerful feel without washing out too many colours or details.

Another way is to use the High Fundamental setting mentioned higher up. When y’all are in a dimly lit place such equally a eating house, High Primal does the job of both brightening and softening the image. Avoid using information technology during the day though, as information technology volition completely wash out your image.


The moral of the story is that at that place is no right or incorrect fashion to approach exposure. The of import affair is that y’all reach your desired consequence … and don’t wind up with a series of blank frames! 😉

If you have any interesting shots yous’ve purposely overexposed for creative effect, why not share them with the states below!



Y’all might too enjoy the following manufactures:

  • Instax Mini 9 Review
  • My favourite Instax Mini 9 accessories


Constitute this article useful? Please accept a moment to
pin information technology!

instax mini 9 blank overexposed light images

Source: https://instantcamerablog.com/tips-and-tricks/instax-mini-9-film-overexposed/