Make Layer Black And White Photoshop

By | 15/11/2022

Turning a color image to black and white tin exist done in many ways on Photoshop. This depends on how much of the prototype you want to be converted, and how much control you need to accommodate the conversion. Here is all you lot demand to know most how to make a layer black and white in Photoshop.

To make a layer black and white in Photoshop, follow these steps:

  1. Select the layer y’all want to convert to blackness and white in the Layers Console.
  2. Go to Layer > New Adjustment Layer > Blackness & White.
  3. Adjust the luminance value of each color range to change the look of your black & white adjustment.

When making a layer black and white you are either removing the saturation (colour) or you lot are converting the colors to blackness and white. In Photoshop, there are a variety of means to exercise this likewise the regular black and white aligning layer. The method you choose ultimately depends on how you want the effects to appear in your project.

To layout all the options on the table, permit’s get into converting layers and images into blackness and white using a handful of beginner-friendly techniques.

How To Make A Unmarried Layer Black And White

The best way to brand an unabridged layer blackness and white is to create a new aligning layer that converts the image to black and white. This method allows yous to control the contrast of the black and white layer. You tin can besides manipulate the image to only accept certain parts in black and white.

To create a blackness and white aligning layer, navigate to the
Adjustments
panel and select the “Black & White” icon. This will create a new layer in the
Layers
panel.



You can as well use the adjustment layer icon at the lesser of the
Layers
panel and select
“Blackness & White…”
to create the new adjustment layer.



One time the new adjustment layer has been created the paradigm volition at present be in black and white. The
Properties
panel will also appear above the
Layers
panel with options to arrange the luminance of different color ranges.



Adjusting the colors in the
Properties
panel will change the luminance of the image by making certain areas darker or lighter. Slide a colour to the right to go far lighter on the image or to the left to brand it darker. Moving the “Blues” color downwardly to -41 makes the child’s shirt a darker shade.



To view the changes you have made to the adjustment layer, concord in the toggle icon at the bottom of the
Properties
panel or hold in “\”.


If you are unhappy with your changes when adjusting the colors, you can easily revert to the default colors by selecting the “Reset to adjustment defaults” icon adjacent to the toggle icon.


Photoshop volition too automatically arrange the colors for you if y’all would like. Select the
Auto
push button in a higher place the colors to create an automatic adjustment of the colors.


Using A Clipping Mask To Isolate Black & White Adjustment Layers

If you have multiple layers in your paradigm, the new black and white adjustment layer will convert all the images below it to black and white. This can be a problem if you are only wanting to catechumen a single layer without affecting the rest of the projection.


To only add black and white to one layer, add the adjustment layer on height of the other layers. Select the aligning icon at the bottom of the
Layers
panel and select “Black & White…” to create the new layer. Your entire image volition now be black and white.




Make sure the new adjustment layer is directly higher up the layer y’all would similar to keep in black and white. The other layers, even if they are below this layer, will remain in colour.


Then, select
Layer > Create Clipping Mask
or press
Alt + Control + Chiliad
(Windows) or
Option + Control + M
(Mac). This volition add a clipping mask to the new adjustment layer which simply applies the issue to the layer directly below it. The clipping mask is shown by the arrow icon on the adjustment layer.




How To Make Parts Of An Epitome Or Layer Black And White

The black and white aligning layer tin can exist used to modify sure parts of a layer without affecting the entire epitome when using layer masks. Here are two methods to make parts of a layer blackness and white.

1. Using A Slope

A gradient tin can be applied to the new adjustment layer to make just part of the image black and white. First, add a new adjustment layer by selecting the adjustments icon at the lesser of the
Layers
panel and selecting “Black and White…”.



When the new adjustment layer is added, it already has a layer mask attached to information technology. The layer mask is shown by the white box beside the adjustment layer. Select the layer mask past clicking on information technology, the selection volition be shown by the white frame around the thumbnail.


When y’all edit the layer mask you will either reveal or hide elements of the layer below it. Past adding black to the mask y’all will hide the adjustment, while white will make information technology visible.

Add together a slope past selecting the slope tool from the toolbar. You tin can also press
G.


In one case the gradient tool is selected, change the gradient manner by clicking on the dropdown menu on the options bar. Select a foreground to transparent gradient. And so click and drag beyond your image where you lot would like the gradient to exist.




The image will at present take a slope effect on the black and white adjustment layer. You will meet the parts of the bottom layer revealed where the black shows on the layer mask thumbnail.



The blackness areas in the gradient remove the black and white layer to reveal the original layer. The white areas volition hide the original layer and prove the new aligning layer in those areas.

2. Using A Selection

Information technology is also possible to select specific elements in your image to change to black and white. You can exercise this past selecting objects and just adding the new adjustment layer to those selections.

To convert specific selections to black and white, choose the quick selection tool from the toolbar or press
West. The quick choice tool will work on complex-shaped objects.


Select the objects you want to change to black and white by clicking and dragging in the confines of the objects you lot want to exist selected.


At present, add your black and white adjustment layer past selecting the icon at the bottom of the
Layers
panel and selecting
“Black and White…”. Your epitome will now show the selected areas in black and white.




The areas that take been converted to blackness and white are shown on the layer mask of the Blackness & White layer. The white area shows where the new layer has been added and the black surface area is where the color layer is still visible.


If you desire to invert your selection to have the hats in color while the rest of the image is black and white, capsize the selection. Once you have made the selection around the hats, navigate to
Select > Changed
or printing
Shift + Command + I

(Windows) or
Shift + Command + I
(Mac).


Now when you lot add together the black and white aligning layer, the hats volition remain in color, with the rest of the epitome in black and white.


Some other way to invert the option is to select the layer mask. The pick is shown by the white border around the thumbnail. Then press
Control + I
(Windows) or
Control + I
(Mac) to capsize the black and white areas with the colour areas. Yous volition run across the alter on the layer mask.



If you desire to make sure colors stand up out while making the rest of your photo black and white, exist sure to check out this Photoshop action which allows you to do the previous steps in a unmarried click! It’s one of the all-time ways to isolate colors without spending a lot of time editing.

Making Specific Colors Black And White

You can choose certain colors to remain in your image while the residue of the image turns black and white. This creates pops of color in certain places on the photo.

To make specific colors black and white, yous need to choose which color range to go on saturated while the residuum are converted. Start past adding a
Hue/Saturation
aligning layer by selecting it from the
Adjustments
panel.


You tin also select information technology by clicking on the adjustment icon at the bottom of the
Layers
panel and choosing
“Hue/Saturation…”.



Once the adjustment layer is selected a new layer will announced in the
Layers
panel. The
Properties
panel above the Layers panel will show options to adjust the new layer. In this console select the
Masks
icon. Then select the
Color Range
pick.




A window will open up to allow you to choose the color range you would like to keep in color. Click on the drop-down arrow next to “Select:” and cull the
Skin Tones
selection.


In the same window select the block next to “Capsize” to create a choice over all the other colors in the image. Select OK to use the selection.


Click on the
Hue/Saturation
icon to navigate back to the properties for the adjustment layer.


Drag the saturation slider to the left until it reaches -100. This will remove the color in the image from all the areas except for where in that location are skin tones present. This method doesn’t give you much control over the selected areas.



If the color range has picked upwards any incorrect colors or kept colors in areas yous didn’t want, you can brush these out. The adjustment layer will automatically have a layer mask to show where the bottom layer is however visible.


Select the castor tool from the toolbar and brand sure the foreground color is set to white. White volition hide pixels from the layer below the layer mask while black volition reveal pixels.



Click and elevate the brush tool over the areas you desire to be converted to blackness and white. For instance, the pinkish from the child’south pants and hair ties are now black and white instead of pinkish.


How To Desaturate An Unabridged Photo Or Layer In Photoshop

Some other quick method of converting your epitome to blackness and white is to desaturate the entire image. To desaturate a photograph select
Paradigm > Adjustments > Desaturate
or press
Shift + Control + U
(Windows) or
Shift + Command +  U
(Mac).


This will catechumen the layer to black and white past removing all the colors from the image. You will observe that there is no new layer created in the
Layers
panel since the change is directly practical to the epitome layer.



The desaturation method is quick and like shooting fish in a barrel without the demand for aligning layers. Layers can get confusing for beginners using the program and information technology is sometimes easier to merely straight edit the layer.

Using the desaturation method prevents you from irresolute the adjustment as you would be able to when creating a new adjustment layer.

This method will besides limit the editing capabilities and it becomes a course of subversive editing. This means yous will non be able to remove this edit afterward on in the project without deleting all your progress.

With these options for turning your images to black and white in Photoshop, you can pick whatever method works best for you lot. If you lot are wanting to isolate colors in Photoshop, make certain to check out my Color Splash Photoshop Activity that allows you to isolate colors in a unmarried click.

color splash photoshop action

Happy Editing!

Source: https://www.bwillcreative.com/how-to-make-a-layer-or-photo-black-and-white-in-photoshop/