Make Your Own Gimble Head

by -149 views

Camera stabilizers tin can be the difference betwixt shaky, unusable footage and beautiful shots that put your viewer in the heart of the activity. The only problem is that stabilizers tin can exist bulky and expensive. However, with a little time and patience you tin can make your ain photographic camera stabilizers with materials yous can find at any hardware store.

1. Camera Dolly

What you apply it for:
A dolly is a photographic camera rig with wheels that moves alongside your field of study. If you’re going to shoot tracking shots, a photographic camera dolly volition profoundly reduce milk shake. Oftentimes a camera dolly will exist placed on a smooth rails to ensure in that location will be no bumps. Information technology is also frequently used in shots where a subject is sitting and talking because having the camera circle the subject volition keep your viewer from getting bored. And you can use it for push and pull shots, which are similar to zoom shot, only gives a different feeling to your audience.

An example of a push shot from the movie


What you demand to make your own:

  • (1) Tripod head
  • (two) Painters sticks
  • (one) 16″ 2X4 board
  • (i) Wood lath viii” wide (longer than x”)
  • (1) Long slice of 1 1/2″ angle aluminum
  • Tape measure out
  • (8) Skate wheels
  • (2) Carriage bolts
  • (eight) Hex bolts
  • (viii) Block washers
  • (36) Regular washers
  • (20) Nuts
  • Black paint (not water based)
  • Dremel
  • Hacksaw
  • Drill

Total price:
Less than $50

Set it up:

Credit: Parker’s Tutorials

ii. GoPro Gimbal

What you utilize it for:
A GoPro is swell for getting shots in the rut of action, merely merely because you are using a GoPro doesn’t hateful your shots demand to exist shaky. A gimbal is a handgrip that allows the rotation of your camera on a unmarried axis. You can too go a 3-axis gimbal for even further stabilization. A gimbal is designed to isolate the camera from your movements, and then that regardless of how you motion, your shot volition stay steady.

Smooth footage using a GoPro gimbal. Credit: Alex Meliss

What you demand to make your own:

  • Corner Caryatid steel
  • (ii) 1/12 Precision ball bearings
  • Bolts and nuts
  • Clear epoxy
  • Kids’ scooter handle
  • (4) Plastic bottle caps
  • (ane) Piece of woods

Total cost: $5

Set it up:

Credit: Brains techKnowlogy

Hire a Production Visitor or Freelancer

three. Steadicam

A Steadicam is actually a make of stabilizer that was created every bit an alternative to a dolly. A steadicam uses weight at the bottom of the rig to eliminate small shakes and twitches that come from holding it in your hands above. When shooting and walking at the same time, you may not have the luxury of being somewhere that a dolly can ringlet. Some steadicams will fifty-fifty utilise a weighted belong to keep the camera steady and to compensate for any milkshake.

A steadicam shot from the movie

Wolf of Wall Street.

What you need to make your own:

  • Power drill
  • Galvanized steel pipe
  • (1) 1/2″ Metal T joint
  • Metallic finish caps
  • (1) 1/2″ Metal flange
  • (ane) 1″ Thick wood:
  • (1) 3/4″ Screw
  • (i) ane/4″ Automobile bolt washer
  • (1) two.5lb Weight plate

Total cost: $15

Prepare information technology up:

Credit: Indy Mogul

4. Shoulder Mountain

A shoulder mount puts the audience in the scene with the discipline and gives them the feeling they are moving forth with the camera. A shoulder mountain is a middle ground between belongings a camera and using a Steadicam. It produces more camera shake than a Steadicam, merely much less than if you were holding the camera. This is something y’all volition see a lot in war films where the filmmaker is trying to get yous to feel what the character is seeing and feeling. These rigs tin can also include weights that weigh the weight of the camera and eases the stress on the filmmaker.

Footage shot with a shoulder rig demonstrating a more than realistic feel than the Steadicam. Credit:

BR Video

What yous need to make your ain:

  • (1) 3/4″ PVC pipe
  • (1) Piece of thermocol
  • (6) 32–2″ Auto screws
  • (six) 30 Machine screw nuts
  • Drill bit and drill
  • Saw
  • Heat gun
  • Tape measure
  • All-Purpose cement
  • Cover plate

Total cost: $20–30

Prepare information technology upward:

Credit: Moving-picture show Anarchism

Bonus: The Prophylactic Band Stabilizer

If you are in the field, and have no mode of using any sort of camera rig or tripod, there are a few homemade solutions y’all tin use. These solutions won’t supercede the actual equipment, but information technology may become you through your shot. For this stabilizer, you just need to attach a rubber band through your chugalug loop and necktie a knot. Then attach the other end onto your camera plate. Now when you pull away, you will feel resistance, which is what will go along your camera from shaking.

What you need to make your own: (i) Rubber band

Ready it up:

Credit: Filmora Video Editor

Gear up to hire a product company or freelancer? Get started