Philips Tv Black Screen Of Death

by -287 views

You’re experiencing the Philips TV blackness screen of expiry?

The black screen of expiry on Philips TVs tin can ordinarily mean two things. The Boob tube is getting
no power
or at that place is a
general hardware malfunction
causing the blackness screen.

1 fashion or some other, in this mail nosotros’ll identify and address the trouble accordingly.

To fix the black screen of death on Philips TV, change the power source, supersede the power adapter, and hard reset your TV. Y’all should also effort bypassing the remote and turning ON your TV from the side panel buttons.

Knowing that we tin can go on to reveal the problem past taking a look at each possibility.

Why Is In that location A Philips Black Screen Of Decease?

The black screen of expiry means that your TV
does not make whatsoever indications of life.

In most cases that means that the TV is not plugged or not receiving power then that is mainly what nosotros’re going to troubleshoot in this guide.


Here are ALL possibilities summarized:

1. Glitch or Bug

Sometimes your Philips Tv set could run across a temporal ability issue, preventing it from existence turned on.

2. Faulty Power Adapter

The power adapter might be faulty. Such damages can happen afterward a sudden power outage.

iii. Ability Source Issue

A malfunction with the source from where your TV is getting power from might exist the cause for the black screen of death.

four. Hardware Issue

If a hardware malfunction where internal device components are damaged is never excluded.

Now when having a better understanding of what you’re dealing with, let’s proceed with addressing each of the possibilities to identify and solve the problem.

How To Fix Philips Television set Black Screen Of Decease?


Earlier we go on with any of the solutions downwardly below,
point the remote towards the Tv and concord the power button for ten seconds.

In case your TV does not make any indication such as TV flicker or LED glimmer, go along with the solutions beneath:

Solution #1 Ability Discharge Your Boob tube

Begin with
discharging
your Philips TV completely. This method is too known as a “power bike” and it’s proven to exist effective against power-related problems.


Here’s how to discharge/ability cycle your Philips Tv:

  1. Aim the remotetowards the TV and printing the
    power button
    once.
  2. Unplug
    the power adapter for
    v minutes.
  3. Re-attach
    the cable once the stated cooldown elapses.
  4. Attempt to
    turn on

    the Telly.
        Alert:
        Don’t cheat. Make certain you lot wait five minutes so the power cycle can be constructive.

Solution #ii Utilise A Dissimilar Wall Outlet

change the outlet

In case your TV is blackness and even so does not make any indications, at that place’s a high chance that there is a mistake with the
power supply.

More accurately, the
power source
might be problematic, and your Philips TV might non exist getting power at all. In that regard, you need to examination with another wall outlet in your household.

        Annotation:
        Plug your TV into a standalone wall outlet and do Non use power dividers.

Solution #3 Replace The Power Adapter

In instance you’ve plugged your TV into a proven wall outlet, and you still can’t plough it on, the next step is to
replace the power adapter. In other words, the cable that is delivering the power.

The but affair yous need to check before purchasing a new ability cable is if the cherry LED on the front end of the Tv set is lit when the TV is connected to power.

In example the LED remains OFF fifty-fifty when the Telly is connected, then in that location is a high chance that the adapter is faulty.

These adapters are not expensive, and you could find an original unit for about
$10
on whatever online or local tech store.

        Tip:
        Avoid using 2d-hand power adapters since they might develop power bug.

Solution #4 Kicking With The Power Push button

use power button to boot

In case your remote cannot plough on the TV, you lot should attempt using the inbuilt side console ability button. You can find it on the
back panel of the TV.

Press the power button for
five-15 seconds

and determine if your Philips Television set would showtime.

In case there are no indications such as Television set screen flicker or LED blink, y’all might be having a more than circuitous trouble.

        Tip:
        You can check where the power push button is located on your Philips Television set model past looking it upwards online.

Solution #5 Supplant Bad Capacitors

The most frequently cause of the black screen of death on your Philips TV is
bad capacitors
on the internal motherboard.

Although it’s non that like shooting fish in a barrel to identify and replace faulty capacitors, we volition guide you lot through the complete process so y’all can do information technology at home.

        Alarm:
        Do Not attempt to open up the Television console, if your warranty is intact.
      

Instead, reach out to Philips to receive professional person assist and repair if necessary.

change capacitors


Here’s how to replace bad capacitors on your Philips TV:

  1. Disconnect your TV
    from the power source along with the power adapter.
  2. Lay the TV down
    and await at the back panel.
  3. Try to locate
    all of the screws
    holding the back panel intact.
  4. Grab an appropriate
    screwdriver
    and undo all
    half-dozen screws
    on your Television receiver’s dorsum.
  5. Pull the dorsum panel gently until you lot
    hear a click.
  6. Look for the
    motherboard
    in the internal part of your TV.
  7. Once located,
    examine the capacitors
    and look for ones with their head split open up.
  8. You will desire to take out
    all capacitors

    who take their pinnacle function split autonomously and supersede them.
  9. Acquire more of the
    same capacitors
    and insert them into the pinholes on the motherboard.
  10. Re-assemble
    the dorsum panel of your TV and exam.

If that couldn’t solve the problem, perhaps you lot should phone call a technician for farther association regarding the black screen of death on your Philips TV.

Read Next:
Why Is My Philips Tv Remote Non Working?

Bottom Line:

Thus, to fix the black screen of death on your Philips TV, begin with ability cycling the device then modify the wall outlet. Moreover, you tin replace the power adapter and attempt to turn on the Philips TV using the inbuilt side panel ability button.

Now when knowing why Philips Tv black screen of death happens, you should utilize the solution that aligns with your case.

Go along in heed that a hardware failure is never excluded, especially if the problem started to occur after a sudden power outage.

  • Author
  • Recent Posts

Nicole B

Source: https://sensemother.com/philips-tv-black-screen-of-death/